SNMP based network monitoring and computer remote monitoring with OPC technology available Help for XR SNMP Tools - XR PerfMon Help
Help for XR SNMP Tools - Introduction Help for XR SNMP Tools - Quick Config Help for XR SNMP Tools - FrontEnd Usage Help for XR SNMP Tools - Monitor Usage Help for XR SNMP Tools - Tag Explorer UsageHelp for XR SNMP Tools - Real Case  
Help for XR SNMP Tools - Copyrigth
Back Bottom

arrowUsing the Server Monitor





Device List


This panel shows all configured devices. Here you can see which devices are slow and control the enable state of each device. It is possible to see how many items are published for each device, helping optimization attempts on particular devices.


Help for XR SNMP Tools - Server Device View
Server Device View



Column Descriptions:

bullet Address: Address of the computer on this network.
bullet Description: Computer description, as configured in the FrontEnd.
bullet Items: Number of counters monitored on the computer.
bullet Scan Rate (ms): The configured scan rate for the device, in milliseconds.
bullet Scan Time (ms): Average response time for this computer, in milliseconds.
bullet Overlap: Indicates that the configured scan rate cannot be maintained, due to excessive response time from the computer. If this happens, you might wish to lower the number of monitored items on the computer or reduce the scan rate (increase the time).
bullet Enabled: Current enable state for the computer.


You can change the enable state of any device in this list. Just right-click the selected device and change the state as you want.

Back Top
©2005 XRatel Software. All rights reserved.