Using the FrontEnd
Computer Network Scan
The first step in configuring the server is to identify all
computers in your network environment. The
Setup Wizard, available via the
Network Scan Wizard button on main toolbar, will attempt
to find all computers in a given network range. This
is useful if you don't want to manually enter each computer
attached to your network.
Computer Network Scan Wizard
The first step only list you all steps in this wizard.
You can customize the following scan options in the second
step:
-
Local Network: search for manageable computers in your default
adapter subnet.
-
Ip Address Range: Search for computers into an IP range.
-
WMI Auth Username: User name to be used for authentication, if
needed.
-
WMI Auth Password: Password to be used for authentication, if
needed.
-
Timeout: Amount of time(in milliseconds) to wait for a WMI call
response.
Network Browsing
Then, in the third step, Setup Wizard will start the network scan.
When the text "Scan Complete" appears, go to the next step. The
scan process can be stopped at any moment clicking on
Stop Scan.
The Step 4 shows you all computers found on network with its IP
address and a description. Select all computers
XR PerfMon Tools should monitor clicking on
the checkbox beside the computer IP and go to the fifth step.
If all computers found should be monitored, click on
Select All.
Step 5 realize a complete scan in selected computers for all CPU's,
Hard Disks and Memory computers. Wait for complete scan and then,
go to the Step 6. Note that you can stop this scan clicking on
Stop Scan button.
The sixth step shows all components found in all computers selected
to be monitored. Now, go to the next step and finish the
wizard.
Computer Browsing
|
|
