Using the FrontEnd
SNMP Network Scan
The first step in configuring the server is to identify all
manageable devices in your network environment. The
SNMP Network Scan Wizard, available via the
Network Scan Wizard button on main toolbar, will attempt
to find all SNMP compliant devices in a given network range. This
is useful if you don't want to manually enter each SNMP device
attached to your network.
SNMP Network Scan Wizard
The first step only list you all steps in this wizard.
You can customize the following scan options in the second
step:
-
SNMP Community: The community between the manager and
agent.
-
Timeout: Amount of time (in milliseconds) to wait for a SNMP
agent response.
-
Local Network: search for manageable devices in your default
adapter subnet.
-
Ip Address Range: Search for devices into an IP range.
Network Browsing
Then, in the third step, Setup Wizard will start the network scan.
When the text "Scan Complete" appears, go to the next step. The
scan process can be stopped at any moment clicking on
Stop Scan.
The Step 4 shows you all devices found on network with its IP
address and a description. Select all devices
XR SNMP Tools should monitor clicking on
the checkbox beside the device IP and go to the fifth step.
If all devices found should be monitored, click on
Select All.
Step 5 realize a complete scan in selected devices for all
interfaces. Wait for complete scan and then, go to the Step 6. Note
that you can stop this scan clicking on Stop Scan
button.
The sixth step shows all interfaces in all devices selected to be
monitored. Now, go to the next step and finish the wizard.
Device Browsing
|
|
