 Using PerfMon FrontEnd
Alarm Settings
XRatel Historian Service can monitor configured variables and trigger alarms when they reach a defined threshold, sending alerts through e-mail.
Profile Settings
You can configure whether or not alarms should be triggered for a specific tag and the threshold for triggering alarms in the Tag Properties dialog. There are also global settings for alarms, available in the Profile Settings dialog(accessible via Edit ->Profile Settings).
You can specify the amount of time to wait before triggering a new alarm. In the bottom group you can specify all settings to send alarm notifications through e-mail. These are:
-
Source E-mail Address: E-Mail address to be used as sender.
-
Destination E-mail Address: E-Mail address to be used as recipient (destination).
-
SMTP Server Address: The host name or IP address of SMTP server used to send e-mail.
-
SMTP Server Port: TCP port used for connecting to the SMTP server (default: 25).
-
SMTP Server Username: Username used for authentication in the SMTP server.
-
SMTP Server Password: Password used for authentication in the SMTP server.
The Test E-mail Settings button tests e-mail settings sending a test e-mail for the configured destination.
|
|
