Using SNMP Server FrontEnd
SNMP Network Scan
The first step in configuring the server is to identify all manageable devices in your network environment. The Setup Wizard, available via Network Scan Wizard button on main toolbar, will attempt to find all SNMP compliant devices in a given network range. This is useful if you don't want to manually enter each SNMP device attached to your network.
SNMP Network Scan Wizard
The first step only list you all steps in this wizard.
You can customize the following scan options in the second step:
-
SNMP Community: The community between the manager and agent.
-
Timeout: Amount of time (in milliseconds) to wait for a SNMP agent response.
-
Local Network: search for manageable devices in your default adapter subnet.
-
Ip Address Range: Search for devices into an IP range.
Network Browsing
Then, in the third step, Setup Wizard will start the network scan When the text "Scan Complete" appears, go to the next step. The scan process can be stopped at any moment clicking on Stop Scan.
The Step 4 shows you all devices found on network with its IP address and a description. Select all devices XRatel SNMP Tools should monitor clicking on the checkbox beside the device IP and go to the fifth step.
If all devices found should be monitored, click on Select All.
In step 5, XRatel SNMP Tools FrontEnd scan selected devices for interfaces. Wait for complete scan and then, go to Step 6. Note that you can stop this scan clicking on Stop Scan button.
The sixth step shows all interfaces in all devices selected to be monitored. Now, go to the next step and finish the wizard.
Device Browsing
|
|
