XRatel SNMP FrontEnd Quick Configuration
XRatel SNMP Server FrontEnd - Main Window
With XRatel SNMP FrontEnd opened, the first step is to discover all devices that should be monitored. To detect SNMP devices on your network, press the Setup Wizard button.
At the second step, select the option Local Network to find devices in your subnet range and go to the next step clicking on Next.
Network Browsing
In the third step, XRatel SNMP FrontEnd will attempt to find all SNMP compliant devices within your subnet range. Go to next step when Scan complete be displayed.
In the fourth step, all devices found will be listed. Select devices you wish to monitor and go to the next step.
Now, Device Browsing will scan for network interfaces in all devices selected for monitoring. Go to the next step when the scan be completed.
All network interfaces found in all devices will be listed in step 6. XRatel SNMP FrontEnd will create Performance Tags for all listed interfaces.
Device Browsing
Go ahead to the next step and complete the setup clicking on Finish.
Now, select all wanted Performance Tags by clicking on History column of each tag. Activated tags are checked and its symbols are colored, while disabled tags are not checked and has gray symbols.
Performance Tags Activation
Click on Activate Profile button to update the server and reflect this new configuration. Then, confirm the publish clicking on Yes.
Profile Activation
Start the server with XRatel SNMP Server Monitor and review its configuration. Probably you'll need to Reload the Server, clicking on Reload Server button. In screenshot below, it is scanning three devices and current Server Status is Normal.
Server Main Window
If your server status indicates Scan Overlap, you need to change some device-specific configuration settings. Please refer to detailed Server configuration section for information on how to do that.
|
|
