Real Test Case General
Test Information
This is a real test case using the server to monitor some SNMP
devices over a slow network.
In a typical network environment there are equipments from many
vendors and consequently different implementations of SNMP protocol
which may interfere in performance, plus not all devices supports
SNMPv2 which is known to be a faster implementation than
SNMPv1.
Tested Network Enviroment
Server Computer Configuration:
-
AMD Sempron(tm) Processor 2800+
-
512MB DDR System Memory
-
40GB Disk space
-
100Mbps Network Connection
-
Running Microsoft Windows X with Service Pack 2
Monitored SNMP Devices:
-
50 Computers using Microsoft SNMP Service
Final Server Configuration
Server Window - Test Configuration
Test Results
In this Real Test Case, the described system configuration was
monitored during a half hour of operation and the following
resources were monitored during this time.
XRatel SNMP Tools Server Processor Usage
Processor usage was monitored on every second and the average
processor load was 9%.
Server Processor Usage
XRatel SNMP Tools Server Memory Usage
Memory usage was monitored on every second and the average memory
use was 7MB.
Server Memory Usage
XRatel SNMP Tools Server Network Usage
Network usage was monitored on every second and the average network
use was 37KB for data in both directions.
Server Network Usage
XRatel SNMP Tools server sucessfully monitored 816 SNMP items
every second in 50 devices with low resource usage. This situation
can be easily reproduced by tuning the server profile and scanning
only useful items.
|
|
