The first step in configuring the server is to identify all computers in your network environment. The Setup Wizard, available via the Network Scan Wizard button on main toolbar, will attempt to find all computers in a given network range. This is useful if you don't want to manually enter each computer attached to your network.

Computer Network Scan Wizard

The first step only lists you all steps in this wizard.

You can customize the following scan options in the second step:

Local Network: search for manageable computers in your default adapter subnet.

IP Address Range: Search for computers into an IP range.

From: First IP address of the desired scan range.

To: Last IP address of the desired scan range.

WMI Auth Username: User name to be used for authentication, if needed.

WMI Auth Password: Password to be used for authentication, if needed.

Timeout: Amount of time (in milliseconds) to wait for a WMI call response.

Network Browsing

Then, in the third step, Setup Wizard will start the network scan. When the text "Scan Complete" appears, go to the next step. The scan process can be stopped at any moment by clicking on Stop Scan.

The Step 4 shows you all computers found on network with its IP address and a description. Select all computers XRatel PerfMon Server should monitor by clicking on the checkbox beside the computer IP and go to the fifth step. If all computers found should be monitored, click on Select All.

Step 5 makes a complete scan in selected computers for all CPU's, Hard Disks and Memory computers. Wait for complete scan and then, go to the Step 6. Notice that you can stop this scan by clicking on Stop Scan button.

The sixth step shows all components found in all computers selected to be monitored. Now, go to the next step and finish the wizard.

Computer Browsing