The first step to configure the server is to identify all manageable devices in your network environment. The Setup Wizard, available via Network Scan Wizard button on main toolbar, will attempt to find all SNMP compliant devices in a given network range. This is useful if you don't want to manually enter each SNMP device attached to your network.

SNMP Network Scan Wizard

The first step lists all steps in this wizard.

You can customize the following scan options in the second step:

SNMP Community: The community between the manager and agent.

Timeout: Amount of time (in milliseconds) to wait for a SNMP agent response.

Local Network: search for manageable devices in your default adapter subnet.

Ip Address Range: Search for devices into an IP range.

        From: First IP address of the desired scan range.

        To: Last IP address of the desired scan range.

Network Browsing

Then, in the third step, Setup Wizard will start the network scan When the text "Scan Complete" appears, go to the next step. The scan process can be stopped at any moment clicking Stop Scan.

The Step 4 shows you all devices found on network with its IP address and a description. Select all devices XRatel SNMP Server should monitor by clicking on the checkbox beside the device IP and go to the fifth step. If all devices found should be monitored, click on Select All.

In step 5, SNMP Server Configuration scan selected devices for interfaces. Wait for complete scan and then, go to Step 6. Notice that you can stop this scan by clicking on Stop Scan button.

The sixth step shows all interfaces in all devices selected to be monitored. Now, go to the next step and finish the wizard.

Device Browsing