Using XRatel OPC Server Monitor

[ Main Window | Server Statistics| Device List]

       Connecting on Host

The first thing to do is connect on a XRatel OPC Server Host. For that you must use OPC Server Scan. You can launch this tool clicking on Connect to a new Server button on Connection Toolbar.

Connection Toolbar

OPC Server Scan

Using OPC  Server Scan tool you can do the following:

Scan by Host: Type the host Name or IP. The scan will look for XRatel OPC Server on that device.

Scan by IP Range: Inform the IP Range to look for XRatel OPC Servers. Notice that you can stop the scan just clicking on Stop Scan button.

Export Probes

You can export all OPC Probes from a specific XRatel OPC Server using Export Probes(CVS) button, after connect with OPC Server. It will generate an CSV file that you can see using your favorite datasheet application.