Using XRatel OPC Server Monitor

[ Main Window | Server Statistics| Device List]

       Device List

Device List

This panel shows all configured devices. You can see all device's probes selecting the device on Device List and you can also see the probes types maximizing the device. It is possible to see how many items are published for each device, helping optimization attempts on particular devices.

Device Information

When selecting a device, it is possible to see it's information on System Menu Panel. This panel shows the following data:

Device description: On the top of the panel.

IP address

Scanned Items: The amount of items scanned in this device.

Scan Time: The time needed to entirely scan this device.

Scan Rate: The refresh rate configured for this device.

Scan Overlap: This text appears only when the scan time is greater than the scan rate, specifying that this device is not configured properly.

Right Panel

Value collected  by OPC Server are shown in Right Panel. The Right Device Panel  has four columns:

Name: Indicates the device name.

Value: Indicates the device value just in time.

Timestamp: Indicates when the last value have been collected.

Quality: Indicates the process quality at time.

To filter the grid use the drag-and-drop grouping bar. See more.

Using the grid you can easily copy all this information to clipboard. You just have to select what you want to copy and type CTRL+C. After that the content will be available on clipboard.